Moving the Cable Management Arm

Facebooktwittergoogle_plusredditpinterestlinkedinFacebooktwittergoogle_plusredditpinterestlinkedin

Moving the Cable Management Away from the Cable Management Tray

  1. The CMA can be pulled away from the device and extended away from the tray for access to the back of the device.
  2. At the hinged end, lift the CMA up and off of the tray to unseat it from the tray catch. Once it is unseated from the tray, swing the CMA away from the system.
You can also extend the CMA into the service position after it is cabled to access the back of the device.

Next, see Routing Cables through the Cable Management Arm.

  • Was this helpful?
  • Yes   No