FortiAP L212B L215B Installation Guide

Facebooktwittergoogle_plusredditpinterestlinkedinFacebooktwittergoogle_plusredditpinterestlinkedin

To use the table top stand

  1. Orient the device to face the wireless router or AP.
  2. Select either 8° and 23° tilting angles.
  3. Connect the LAN cable under the table stand to the DC injector.

To mount the device to a pole

  1. Orient the device to face the wireless router or AP.
  2. Loop the provided two cable ties through the slots on the back of the device and then around the pole.
  3. Tighten the strap and ensure the device is firmly in place.

To mount the device to a wall

  1. Using the wall mount base as a template, mark the location of the mounting holes on a flat wall surface.
  2. Drill the mounting holes in the marked locations. The holes are 60mm (2.3 inches) apart.
  3. Fasten the unit securely to the wall using the provided mounting anchors and screws.

Latest posts by In Hye Lee (see all)

  • Was this helpful?
  • Yes   No