FortiAP C220C, C225C, C220SC, C225SC Installation Guide

Facebooktwittergoogle_plusredditpinterestlinkedinFacebooktwittergoogle_plusredditpinterestlinkedin

The unit can be mounted on a desk or on a wall or ceiling using the provided wall/ceiling mounting hardware kit.

FortiAP C225C and FortiAP C225SC have external antennas. Attach the antennas to the antenna mounts before you install the unit to a wall or ceiling.

Note: FortiAP C220C and FortiAP C220SC have internal antennas. This step is not applicable when installing those models.

To attach the unit to a wall

Before you begin: Select an appropriate location. Mark the locations on the wall where the anchors will be inserted, and then drill the mounting holes.

  1. Insert the anchors into the mounting holes.
  2. Use the screws to attach the mounting bracket to the anchors.
  3. Mount the device on the mounting bracket, then slide it to the left until it clicks into place.

To attach the unit to a ceiling tile

Before you begin: Remove the ceiling tile from its track. Mark the location on the ceiling tile where the screws will be inserted, and then drill the holes.

  1. Use the screws, washers, and wing nuts to attach the mounting bracket to the celing tile.
  2. Mount the device on the mounting bracket, then slide it to the left until it clicks into place.
  3. Install the ceiling tile into its track.

Latest posts by In Hye Lee (see all)

  • Was this helpful?
  • Yes   No