Engaging and Releasing the Slam Latch

Facebooktwittergoogle_plusredditpinterestlinkedinFacebooktwittergoogle_plusredditpinterestlinkedin

Engaging and Releasing the Slam Latch

  1. Facing the front, locate the slam latches on either side of the system.
  2. The latches engage automatically as the system is pushed into the rack and are released by pulling up on the latches.
  3. To secure the system for shipment in the rack or for other unstable environments, locate the hard-mount screw under each latch and tighten them with an appropriate screwdriver.

Next, see Routing cables without the Cable Management Arm.

  • Was this helpful?
  • Yes   No